How to Recycle Polystyrene Waste From Production to Post-Consumption
Polystyrene foam is used throughout manufacturing, retail and distribution because it is lightweight, protective and insulating. It appears as production offcuts, appliance and electronics packaging, insulated shipping boxes and other protective materials. Once these products have been manufactured or unpacked, the same low weight that makes polystyrene useful also makes the waste expensive to store and transport.
Post-consumer polystyrene comes from packaging that has already completed its original use. Its condition varies according to where it was collected and how it was stored. Material from retailers, warehouses and distribution centres is often suitable for recycling when it is kept separate from other waste.

GREENMAX polystyrene compactor uses crushing and screw compression to turn loose EPS foam into dense blocks without melting the material. The operator feeds the foam into the hopper, after which it is crushed into smaller pieces and pushed through the compression section.
Cold compaction can reduce EPS volume by up to 50:1. The resulting blocks require less storage space and allow more material to be loaded for each shipment. This method is suitable for manufacturers, retailers and recycling centres that generate a regular supply of polystyrene foam.

GREENMAX polystyrene densifier uses a different process. After the foam is shredded, a heated screw melts and extrudes the material into compact ingots. The volume of EPS foam can be reduced by up to 90:1.
The higher reduction ratio is useful when storage space is limited or the densified material needs to travel a longer distance. Because the foam is melted, the equipment configuration should be matched to the material type, processing volume and operating conditions of the facility.

After compaction or densification, the polystyrene blocks or ingots can be sent to a specialist recycler. The material is then processed into recycled polystyrene pellets and used to manufacture products such as picture frames, decorative mouldings and plastic profiles.
INTCO Recycling supplies GREENMAX polystyrene recycling equipment and may purchase qualified compacted or densified material according to its condition, quantity and current purchasing requirements. This connects volume reduction with a downstream recycling route, helping businesses manage polystyrene waste from production through to post-consumer recovery.
Leave a Reply