where to compact polystyrene
1. polystyrene factory
Though they can reuse part of their waste after crushing, there’re still some waste needed to be taken care of.
After compression by compactor, they can sell extra waste to recycler and save much space in their plant
2. Furniture or home appliance dealers
Polystyrene is commonly used as protective packaging.
Lot of waste packaging will be generated in dealer’s warehouse after delivery or repacking.
Most of our clients come from such industry.
They used to pay recycling agent much money for waste disposal. But now they can even make money from their waste by compact their waste
3. Waste management companies
They collected large quantity and different kinds of polystyrene waste. Only problem is separation and sorting.
compactor- solution to polystyrene recycling
Polystyrene foam is a registered trademark of the Dow Chemical Company. Foam products are lightweight, sturdy, inexpensive, and insulate. And it also performs perfectly in terms of cost, versatility and efficiency. Cups, food trays, walls for houses, fast food packaging, vegetable boxes, even household appliance packaging are usually made of Expandable polystyrene.
Below are a number of EXPANDED POLYSTYRENE properties according to EN 13163.
• Light weight
EXPANDED POLYSTYRENE is very light weight, since it is effectively 98% air captured within a 2% cellular matrix. Densities of polystyrene insulation range between 10 and 35kg/m2, allowing light and safe construction work.
• Strength, structural stability and walk ability
In spite of its light weight, the unique structure of EXPANDED POLYSTYRENE brings the benefits of exceptional compressive strength. It is ideal for use in many construction and civil engineering applications, such as a structural base infill, like in road, railway and bridge infrastructures.
A common misconception about polystyrene foam is that foam is unrecyclable.
But polystyrene can be compressed into blocks by compactor, which will solve transportation problem.
recycling of polystyrene
Have you ever been annoyed with the enormous amount of packaging that comes with your brand new TV or refrigerator when opening up them? You almost always end up with more packaging than product. Plastic bags, cardboard, and the worst, Expanded Polystyrene.
90% Polystyrene went to landfill finally, while others, like plastic bags, cardboard can be reused again.
It’s estimated the quantity of waste expanded polystyrene packaging reach more than 40,335 tons every year in Australia. And only 2,775 tons of polystyrene was collected and recycled in Australia during 2011-2012. So it’s only a 6.9% recycle rate.
Polystyrene is not safe in landfill.
When thrown out, polystyrene does not break down and takes up precious space in landfill.
Polystyrene is easily blown by the wind due to its light weight, ending up as litter in the environment where it can harm animals and marine life.
character of expanded polystyrene
EXPANDED POLYSTYRENE can be moulded into an infinite variety of shapes for a wide range of uses. In the dairy industry, polystyrene is used to make plastic containers for margarine, yogurt .
In the catering industries, disposables such as cups, plates and trays made from polystyrene keep business running smoothly and safely. Food and beverages stay warmer, cooler and fresher longer, resulting in less food and packaging waste due to spoilage, damaged packaging and leakage.
EXPANDED POLYSTYRENE does not harbour bacteria.
For example, EXPANDED POLYSTYRENE service ware means no leftover food particles, no risk of transmitting infections- important attributes not only for restaurants, but for hospitals and airlines as well.
The other advantage of using polystyrene disposables is that they don’t need a great deal of water to clean them. In addition, large institutions like hospitals and caterers still can’t use phosphate free materials in their dishwashers.
Expanded polystyrene
Expanded polystyrene structures are produced through a 3 part process called steam moulding, that expands these tiny beads to more than 40 times their original size.
This 3 part expanding process is precisely timed to determine the size the beads will finally reach. It is this final density of the expanded beads that determines the strength of the structure.
After the first stage the beads are left to absorb air for between 24 and 48 hours. In the final stage the freshly expanded beads are poured into individually manufactured moulds where steam and pressure are applied to compress and bond the beads into a final structure of the required strength and density.
Expanded polystyrene
Expanded polystyrene foam is typically white-colored and expanded thermo-plastic material retrieved from oil by polymerization of styrene monomer. The product comprised by 98 % air and the rest polystyrene is obtained by swelling polystyrene particles by pentane gas and amalgamating with vapor.
Pentane enables billions of small pores in these particles. Meanwhile, it is replaced by air in a very short time. Therefore, billions of small closed-porous cells (3-6 billions in 1 m³ EPS) within its body is trapped with inert air. Air is a perfect heat insulation material known as environmental-friendly and economical.
Expanded polystyrene is among the best well-known insulators in world standards. On the other hand, it is also recyclable and used as an energy resource.
polystyrene recycling tips
Expanded polystyrene is hard to recycle mainly come from its lightweight, which generates lot of transportation fee.
To establish a recycling business for polystyrene, here are some operation ways FYI.
1. Collecting all waste EPS to waste management companies’ recycling center, then sorting and processing
2. Cooperating with government, and installing machine in public places, like fish or vegetable markets
3. Leasing machines to private companies, who generate large quantity of EPS waste stably, like Furniture or home appliance dealers etc.
4. Introducing our solution to waste sources directly, which is usually proceeding slowly unless governments bans EPS from landfill
know more on polystyrene
Styrene is essential in the manufacture of many products, such as:
Polystyrene foam, used in foam food packaging products and building insulation.
HIPS, used in rigid CD cases, appliance housings
Composite products, used in wind turbine parts, boats etc
ABS, used in household appliances ,refrigerator liners, luggage.
SAN, used in food containers and optical fibers
Inspite of the wide usage of styrene, it is regarded as a “hazardous chemical”, especially in case of eye contact. Styrene oxide is considered toxic, mutagenic, and possibly carcinogenic. But the Danish EPA already concluded that it won’t cause a cancer concern for styrene.
Polystyrene is a thermoplastic, so it can be melted and molded into many different plastic items. Nowadays, the recycling of polystyrene follows the following process:
- 1. Segregation –separate polystyrene foam products from other wastes and then sorted.
- 2. Shredding – Larger blocks are shredded into pieces. For small polystyrene foam used as internal packaging, like “peanuts”, can skip this step and go directly to the pelletizing machine.
- 3. Compaction – The segregated polystyrene foam products are compressed by a compactor. Some brands of compactors have a compaction ratio of 50:1. So the volume of polystyrene foam will be highly reduced, may up to 98%.
- 4. Melting – The pieces are put in pelletizing extruders where they are heated and melted. Output material can then be reused to produce clothes hangers, picture frames, DVD cases and numerous other plastic products.
methods to deal with polystyrene
Styrene is an organic hydrocarbon used to manufacture rubber and plastic components. It’s backbone of many familiar products, such as rubber tires, food containers, building insulation, carpet backing, boat hulls, surfboards, residential kitchen countertops, bathtubs and shower enclosures.
The first method of polystyrene recycling is melting this material down by a machine. The melting machine can shrink this material’s size by removing excess air. Output products can be reused in diesel fuel as it consists a lot of petroleum.
This type of recycling is also used to produce molds or other forms of plastic. Melted polystyrene can be poured into molds to form new products. For example, some manufacturers produce benches, picture frames, and even chairs using petroleum-derived thermoplastic materials.
Polystyrene insulation panels and packaging can be reused for new building materials. Manufacturers shred the polystyrene into small pieces. Then small pieces will be added to concrete mixtures to enhance the hardness and insulation features of the concrete. The small pieces can even just be pressed into sheets of insulation panels.
why there is so much polystyrene?
Enormous amount of packaging that comes with your brand new PC, printer or monitor, polystyrene waste contributes most. You almost always end up with more packaging than product. Though new home appliances products arrive with more polystyrene than equipment, but the problem is that product manufacturers rarely provide a solution for recycling of polystyrene. EPS becomes a waste material that companies must pay to dispose of.
More often than not, Polystyrene ends up in landfill, where it will stay for centuries. When thrown out, polystyrene does not break down and takes up precious space in landfill.
Polystyrene is easily blown by the wind due to its light weight, ending up as litter in the environment where it can harm animals and marine life.
Proper recycling of polystyrene is often difficult and expensive. The size of the product compared to its weight means that it takes up more valuable space in the truck, and hence transport costs increase. With the creation of compactor machine, the transportation problem is solved now.
Archives
- October 2026
- August 2026
- July 2026
- June 2026
- May 2026
- April 2026
- March 2026
- February 2026
- January 2026
- December 2025
- November 2025
- October 2025
- September 2025
- August 2025
- July 2025
- June 2025
- May 2025
- April 2025
- March 2025
- February 2025
- January 2025
- December 2024
- November 2024
- September 2024
- August 2024
- July 2024
- June 2024
- May 2024
- March 2023
- February 2023
- January 2023
- December 2022
- November 2022
- October 2022
- September 2022
- August 2022
- July 2022
- June 2022
- May 2022
- April 2022
- March 2022
- February 2022
- January 2022
- December 2021
- November 2021
- October 2021
- September 2021
- August 2021
- July 2021
- June 2021
- May 2021
- April 2021
- March 2021
- February 2021
- January 2021
- December 2020
- November 2020
- October 2020
- September 2020
- August 2020
- July 2020
- June 2020
- May 2020
- April 2020
- March 2020
- November 2019
- October 2019
- September 2019
- August 2019
- July 2019
- June 2019
- May 2019
- March 2019
- January 2019
- December 2018
- November 2018
- October 2018
- September 2018
- August 2018
- July 2018
- June 2018
- May 2018
- April 2018
- March 2018
- February 2018
- January 2018
- December 2017
- November 2017
- October 2017
- September 2017
- August 2017
- July 2017
- June 2017
- May 2017
- April 2017
- March 2017
- February 2017
- January 2017
- December 2016
- November 2016
- October 2016
- September 2016
- August 2016
- July 2016
- May 2016
- April 2016
- March 2016
- February 2016
- January 2016
- December 2015
- November 2015
- October 2015
- September 2015
- August 2015
- July 2015
- June 2015
- May 2015
- April 2015
- March 2015
- February 2015
- January 2015
- December 2014
- November 2014
- October 2014
- September 2014
- August 2014
- July 2014
- June 2014
- May 2014
- April 2014
- March 2014
- February 2014
- January 2014
- December 2013
- November 2013
- June 2013
Calendar
| M | T | W | T | F | S | S |
|---|---|---|---|---|---|---|
| 1 | ||||||
| 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| 9 | 10 | 11 | 12 | 13 | 14 | 15 |
| 16 | 17 | 18 | 19 | 20 | 21 | 22 |
| 23 | 24 | 25 | 26 | 27 | 28 | 29 |
| 30 | ||||||
Categories
- application
- beverage bottle handling in the United States
- beverage giant's improvement of plastic bottles
- compactor
- compactor China
- drink containers news in the United States
- environment
- EPE foam recycling
- EPE foam recycling machine
- EPP recycling
- EPS compactor
- EPS foam compactor
- EPS foam densifier
- EPS foam production news
- EPS foam recycling
- EPS foam recycling news
- EPS handling and recycling solutions
- EPS recycling machine
- extruded XPS board
- Extrusion Blowing Machine
- Extrusion Blowing Machine News
- foam densifier
- foam recycling
- foam recycling company
- Foam Recycling Densifiers are produced For Sale
- foam recycling machine
- future plastic industry development
- greenmax machine
- HDPE foam material
- Industrial plastic mold production
- industrial will enter into 4.0 period
- industry
- information about plastic industry
- information about waste plastic recycling
- insulation
- Introduction to plastics
- latest news for waste plastic recycling
- machines for waste plastic packaging materials
- molding
- new change about plastic condition in China
- new plastic packaging development
- new plastic technology
- News about China's plastics
- news about packaging machines
- news about plastic recycling
- news about polystyrene foam
- news and conditions about aluminum in China
- packaging market news
- PE foam material
- PE foam recycling
- Pepsi technology improvement of plastic bottles
- plastic blow molding machine
- plastic bottles import policy news
- plastic development news in Germany
- plastic equipment market condition
- plastic equipment news
- plastic film
- Plastic film company news in South Korea and Saudi Arabia
- plastic foam processing machine news
- plastic foam recycling machine
- plastic granulator information
- plastic industry news
- plastic machines market in Italy
- plastic material made by trash
- plastic news around the world
- plastic packaging news
- plastic recycling
- plastic recycling exhibition in China
- plastic recycling machines
- plastic recycling methods
- plastic usage news
- polyethylene foam recycling
- polyethylene plastic foam
- polyethylene recycling
- polystyrene
- polystyrene compactor
- polystyrene compactor China
- polystyrene container recycling
- polystyrene crusher
- polystyrene densifier
- polystyrene foam information
- polystyrene foam recycling
- polystyrene melting machine
- polystyrene recovery history
- polystyrene recycling
- polystyrene recycling company
- polystyrene shredder
- polyurethane foam recycling
- PP material news and development in Russia
- ps
- PSP
- PUR foam handling
- pur foam use news
- recycle
- sorting
- styrene
- styrofoam
- Styrofoam compactor
- styrofoam densifier &plastic news in China
- Styrofoam Densifiers
- Styrofoam recycler
- Styrofoam recycling
- Styrofoam recycling company
- styrofoam recycling machine
- suggestions for waste plastic recycling
- the development of waste polystyrene foam handling machine industry
- Uncategorized
- waste EPS recycling
- waste plastic foam handling machines
- waste plastic processing machine
- waste plastic recycling
- waste plastic recycling and condition in Auckland
- waste plastic recycling condition
- waste plastic recycling machine

