Different Foams Have Different Handling Ways
Foam waste recycling methods currently has two modes, namely mechanical recycling method, chemical recycling methods and other recycling methods, different waste foam recycling methods have different characteristics. So it is necessary to choose the right method for recycling waste foam.
There are two basic recycling methods: the chemical recycling method and the mechanical recycling method.
Chemical recycling method, the feasibility of the method attracted general people’s attention, which is a good one feasible method. The main method is to decompose the waste plastic foam into monomers, fuel, and other reusable components of the compound, making the recovery of EPS a truly closed-loop process.
Quality chemical raw materials using chemical recycling method decomposes not only good quality, comparable to the quality of the new material, but also can handle large quantities of waste to achieve the best resources recycling effect.
Mechanical recycling method is the use of machinery and equipment for the waste foam to be recycled, and the usually used equipment is foam granulator and scrap foam lump machines.
Waste scrap foam granulation machine is crushed, then add crushed foam to foam extruder screw barrel after heating to melt extrusion, bracing, cooling, pelletizing and other production processes. Mechanical recycling is the most used method to cut the waste into pellets regeneration for small manufacturers. Also, the mechanical recycling is the most used method to invest at least and the most effective method of recovering scrap foam.
But for most manufacturers related to plastic and polystyrene foam, they prefer to use mechanical machines to recycle the waste as the mechanical can handle the wastes easily and quickly with little cost, meanwhile, they can get benefits from the waste recycling.



Leave a Reply