Selection of the extruder in the production of recycled plastics
During polystyrene foam recycling machine producing, raw materials may exist various impurities and plasticizing incomplete fine crystal particles, especially all kinds of impurities in plastics recycling process, if there is no installation of the exchanger for filtering impurities, it will result in the decline in the quality of the products, defective products increasing and production disruptions even caused damage of the extrusion equipment and huge waste of raw materials. So production cost and energy consumption is high, production capacity is relatively reduced, the labor intensity of workers increased.

Changer is the essential equipment in the production of recycled plastics. Extruder non-stop screen filter can not only filter various impurities through the filtering net, more important is can replace filter after installed for network device when can stop extrusion machine production and the disassembly of the mold, specific screen changer varieties can also replace filter without affecting the normal production condition, and reducing energy consumption, waste, cost and worker’s labor intensity and improve the productivity and economic benefits.
The basic configuration of the exchanger is composed of the main body and the hydraulic power system. The electronic control system can be matched with the electric control system to control the time of the network.
Changer needs to issue that the working position filter can switch freely in the normal working pressure state, but also to ensure that materials do not leak, which proposed high requirements for exchanging and manufacturing network. Only inferior, not qualified network device will occur the material leakage. And a qualified network device, firstly the structure design should be reasonable, and secondly, the material is great, then the processing technology and precision is exact, and finally assembly and debugging need to have experience, in order to ensure that in high temperature, high pressure state, no-deformation, and always maintain the precision of precision, long-term non leakage.
In the recycling of polystyrene foam, it is generally compacted out in the recycling. The plastic can be recycled by compressing, crushing, and then extrusion moulding. The compressed styrofoam blocks can be carried out, and for granulation, it is divided into water drop down, water cut, and so on. Different granulation process, production requirements are different. And types of network device is also different. The converter can be divided into single plate type double station, double plate and double plate, double column and double column, and the net belt type is suitable for granulation production.
Leave a Reply