The main features of XPS insulation board
XPS extruded insulation board: polystyrene resin is as raw material of insulation material, added together with other raw materials and polymers, then by heating and mixing while injecting catalyst and then extruded out the molding and manufactured high-density rigid board, which internal structure is independent of closed foam with high compression, non-absorbent, moisture-proof and anti-permeability. Due to its own low thermal conductivity, thermal insulation effect is very good, the main features are the excellent insulation properties, good water repellency, low water absorption, high hardness lightweight.

1. Folding Insulation
The XPS insulation board has many characteristics included high thermal resistance, low linear expansion. Its closed cell structure rate reached more than 99%, forming a vacuum layer to prevent the flow of cooling air, ensuring lasting stability and insulation performance, leading edge self-evident. Practice has proved 20mm thick XPS extruded insulation board, insulation effect is equivalent to 50mm thick polystyrene foam, 120mm thick cement perlite. Therefore, this material is the best choice for building insulation.
2. Folding high compressive strength
Because of the special structure of the XPS board, its compressive strength is high, impact resistance is strong. According to the size and thickness of XPS its compressive strength reaches above 150 ~ 500Kpa, it can withstand the load of the ground, it is widely used in geothermal projects, highways, airport runways, the square ground, large cold storage insulation and interior decoration and other fields.
3. Folding water-repellent, moisture-proof
Water absorption is an important parameter to measure the insulation materials. After absorbing water, insulation properties fall. At low temperatures, inhalation of water can easily freeze, destroy the structure of the insulation material, so that the compression plate and insulation performance decline. Because polystyrene molecular structure does not absorb water, sheet stable molecular structure, without gaps, solved the leakage of other materials, penetration, frost, condensation and other issues.
4. Folding light texture, easy to use
The chemical structure of XPS board is completely closed-cell foam physical structure , it has the characteristics of light weight, high strength, easy to cut, transport, and difficult to damage, easy to install.
5. Folding stability, good corrosion resistance
Prolonged use, not aging, decomposition, does not produce harmful substances, the chemical properties is extremely stable and will not cause corrosion due to water absorption and degradation to performance degradation at high temperatures can still maintain its superior performance, according to the information, XPS extrusion insulation boards can still maintain excellent performance, and will not decompose or mildew, no volatile toxic substances.
6. Environmental Products
XPS board detected by the state departments from chemically stable, non-volatile harmful substances, harmful to humans, the production of raw materials using environmentally friendly materials, do not produce any industrial pollution. The product is environmentally friendly building materials.
7. XPS is recyclable
XPS has a closed, uniform cell structure so it is stronger than EPS and has a smoother surface. For the same reason, XPS is also hard to compress, but GreenMax Hot Melt Densifier is a good choice to recycle XPS, and after a process of shredding, heating and extruding, he foam becomes the densified PS ingots. Finally, it is possible to achieve a volume reduction ratio up to 50:1.
Leave a Reply