Waste Rigid Polyurethane Foam Plastics Management and Handling
Rigid polyurethane foam is an excellent insulation material and structure materials. Various types of polyurethane production after the soft foam. Rigid polyurethane foam is a highly cross-linked thermoset materials. Most of the closed-cell foam structure, a small amount of foam open cell structure for special occasions.
The main characteristics of rigid polyurethane foam is its hard and tough, in addition, because of their different starting, blowing agents, catalysts and other additives in the amount and variety, but also gives a different performance of rigid polyurethane foam.
The expandable, flexible, abrasion resistance, low temperature resistance, solvent resistance, and excellent performance of biological aging, etc. which could be widely used in refrigeration equipment, automobiles, trains, roof, hollow brick foam, polyurethane foam concrete, tank pipe insulation, packaging, office supplies, and other fields. Widespread use has also led to large numbers of waste. Pollution of the environment is a severe issue, so the polyurethane foam recycling and disposal has become an urgent problem to be solved.
In general, the recycling of rigid polyurethane foam has the following methods: grinding, physical recovery, chemical recovery and combustion heat recovery method. Treatment crush and old scrap polyurethane before applying the first cut or crushed, sieved to obtain the desired size pieces or powder. In general rigid polyurethane foam pulverized is easier. So its crushing technology is more mature. Most of them have been put into commercialization, such as precision cutting technology, flachmaritsen extrusion technology. Both of them can be crushed to a particle size that is less than 1 MM.



Leave a Reply